Keith Willcock, Product Manager for Siemens Alpha Circuit Protection Products, reviews the implications for designers and installers of electrical installations from the latest requirements for additional protection for socket outlets in BS 7671, including Amendment 2. Regulation 411.3.3 Within Chapter 41 (protection against electric shock) Regulation 411.3.3 now tells us: ‘.. in AC systems additional ...

The post Additional protection for socket outlets appeared first on Professional Electrician.

This article from the experts at NICEIC discusses the purpose of carrying out protective equipotential bonding in commercial and/or industrial type properties, and how to verify the electrical continuity of protective bonding conductors in such a location. Introduction The majority of electrical installations typically use Automatic Disconnection of Supply (ADS) as the protective measure for ...

The post The requirements of BS 7671 for protective equipotential bonding where ADS is used | NICEIC appeared first on Professional Electrician.

It would appear that many people, including some whose work requires involvement with electrical installations, are not aware of the differences between earthing and bonding. This article outlines their different, but equally important, functions within an installation. In general, virtually all electrical installations will require both earthing and bonding in order to meet the requirements ...

The post What are the purposes of, and difference between earthing and bonding within an electrical installation? NICEIC appeared first on Professional Electrician.

Frank Bertie, Chief Technical Officer at NAPIT, introduces the May 2023 Corrigendum. On 9th May 2023, IET and BSI announced the release of a Corrigendum to BS 7671:2018+A2:2022. The Corrigendum was published on 15th May 2023 and makes changes to six areas of BS 7671 that came into effect immediately. There is often a Corrigendum ...

The post What changes took place following the May 2023 Corrigendum? | NAPIT appeared first on Professional Electrician.

In this article, produced for PE before his recent passing, the late Paul Skyrme looks at the relationship between the Electricity at Work Regulations and BS 7671. This article intends to explain the inter-relationship between standards and legislation, using BS 7671 and the Electricity at Work Regulations as the reference point. Firstly, it should remembered ...

The post EAWR and BS 7671: can one help the other? | Paul Skyrme appeared first on Professional Electrician.

BS 7671 permits the use of a range of supplies to equipment on construction sites. This article from the experts at NICEIC summarises the requirements in Section 704 for the use of reduced low voltage (RLV) supplies in such locations. When considering the use of RLV, it is important to meet the requirements of both ...

The post Requirements for the use of reduced low voltage (RLV) systems on construction sites | NICEIC appeared first on Professional Electrician.

Frank Bertie, Chief Technical Officer at NAPIT, looks into understanding the requirements for maximum demand. When carrying out any new work, whether it is a brand-new building or an addition to an existing installation, BS 7671 requires an assessment of the proposed installation works. This involves an assessment of the general characteristics of the installation ...

The post Maximum demand: understanding the requirements for any new electrical installation | NAPIT appeared first on Professional Electrician.

The experts at NICEIC consider the effect of ambient conditions and installation methods when determining minimum live conductor sizes. BS 7671 often specifies a minimum cross-sectional area for live conductors and for the purposes of resistance to mechanical damage likely in a particular application or environment. In most cases, the limiting factor is current-carrying capacity. ...

The post Factors affecting the current-carrying capacity of live conductors | NICEIC appeared first on Professional Electrician.

Using LED drivers for a bespoke lighting installation can be confusing due to the range of different types and possible variations for their connection that are available. This article from the experts at NICEIC will describe the function of LED drivers, highlight where and how they may be used, and also advise on which requirements ...

The post The function of LED drivers: where and how they should be used | NICEIC appeared first on Professional Electrician.

Scolmore Group looks at the ever-changing regulations regarding SPDs and ponders what the future might hold for domestic usage. BS 7671 is due for a second amendment this year and we currently understand SPDs are due for review. It’s proposed the current regulations are changed to simplify the process a designer completes to identify if ...

The post The ever-changing regulations of SPDs: What is the future for domestic usage? | Scolmore appeared first on Professional Electrician.